Enable text based alternatives for graph display and drawing entry

Click here to erase all data entry on this page

Boyle’s Law: Pressure and Volume

Robert Boyle, a philosopher and theologian, studied the properties of gases in the 17th century. He noticed that gases behave similarly to springs; when compressed or expanded, they tend to ‘spring’ back to their original volume. He published his findings in 1662 in a monograph entitled The Spring of the Air and Its Effects.

You will make observations similar to those of Robert Boyle and learn about the relationship between the pressure and volume of an ideal gas.

In this video we'll do an overview of the Balloon experiment in the gases lab.

  1. To start this activity, click this link for Boyle’s Law: Pressure and Volume. The lab will load in a new tab. Click back to this tab to read further instructions and complete the questions below. You can follow along with the instructions below in the Procedures tab in the lab.
  2. Note that the balloon in the chamber is filled with 0.300 moles of an ideal gas (MW = 4 g/mol) at a temperature of 298 K, a pressure of 1.00 atm, and a volume of 7.336 L. 
  3. In the Live Data menu in the tray, click on the Save Data button to start recording P, V, T, and n data to the lab book. Increase the pressure from 1 atm to 10 atm, one atmosphere at a time, by clicking the up arrow above the 1 in the P control area in Live Data. You can also click next to the digit you want to change, delete the digit and type the new value you want. Then just click Enter to trigger the change.
  4. Click Stop Saving to stop recording data in the Lab Book. To help keep track of your data tables in the Lab Book, type Ideal Gas 1 in the Notes box at the bottom of the Lab Book tab. Then click Enter and that will add that note right under your data table.
  5. Zoom Out by clicking the green arrow next to the Save button in the top left of the gas chamber. Click Return Tank on the gas cylinder. On the table underneath the gas chamber is a switch to choose Real Gases or Ideal Gases. Click on Ideal Gases and choose the cylinder labeled Ideal 8 (Ideal 8 MW = 222 g/mol). Click on the balloon chamber to Zoom In and set the temperature, pressure, and moles to 298 K, 1.00 atm, and 0.300 moles, respectively. Repeat the experiment with this gas labeling the data table when you are done as Ideal Gas 8.
  6. Open the Presets menu in the tray and select Lab Preset: Balloon Experiment N2. Again, set the temperature, pressure, and moles to 298 K, 1.00 atm, and 0.300 moles, respectively. Repeat the experiment with this gas labeling the data table Real Gas N2.
  7. Open the Lab Book and click on the Copy Data button above the data table for Ideal Gas 1. Paste the data into a spreadsheet program and create a graph with volume on the x-axis and pressure on the y-axis. Also create a graph for your data from Ideal Gas 8 and Real Gas N2.
  8. Based on your data, what relationship exists between the pressure and the volume of a gas (assuming a constant temperature)?


9.         Look up a statement of Boyle’s Law in your textbook. Do your results further prove this?


  1. Complete the tables from the data saved in your Lab Book. Use only a sampling of the data for pressures at 1, 3, 6, and 9 atm. Calculate the product of P · V for each row.

 

    Ideal Gas 1 MW = 4 g/mol

Volume (L)

Pressure (atm)

PV Product (P·V)

1
3
6
9

 


    Ideal Gas 8 MW = 222 g/mol

Volume (L)

Pressure (atm)

PV Product (P · V)

1
3
6
9

 


Real Gas N2

Volume (L)

Pressure (atm)

PV Product (P · V)

1
3
6
9